I upgraded the bar that attached the face to the body parts and magnet piece, as the original design would break if the magnet fell to the floor. I cut out the bar hole to fit a 3/8" dowel. Now it is much more secure.
Clienti felici
Customer Reviews
Overall rating: 4.9 / 5 from 2628 reviews.
Cut and went together great, removed the square hole in the middle to make way for a message.
It came out nice the candles were a little difficult to glue in place but as a hole very nice.
very accurate drawing.
what's to say? everything worked as expected. :)
Easy make
They turned out lovely. Thank you.
Easy build.
Everybody loves them, I’ve made them 3 times and will do it again. Easy to cut, and assemble, it just takes some time to paint them.
Great detail
Beautiful design. Went well with part of an antique table top.
Lots of good comments.
Great design and really fun to put together took me about a week just doing it in evenings. would highly recommend
Nice patern. Cut clean.had tu adjust the slots whar it fits
Great file!
Love them. And so do my animal lovers.
Files were easy to download, easy to cut/engrave and put together!! So much fun to make these countdown ornaments!! Love them all!
Love the finished product. But had trouble getting the pieces to fit on the base correctly. The flat piece of the small roof had to be resized to fit correctly on the 3mm file as well.
Yay
Fun design. Little tricky to hold the tops but manageable. Fun project.
I’m making four sets of these for make November craft show
Amazing files , just as they’re supposed to be cut and engraved beautifully
Easy file. Decided not to use the outer sign but it laser and scores well too.
This was my first one I did. I plan on doing a few more.
Excellent product easy-to-use.
Design is Great BUT Really Need to Do Something with Hinges...UNLESS the Hinges are Opposite Direction of Provided Photo is the Only Way Lid Opens like it's Suppose to...Would be 5 Stars If Hinges are Corrected....
6 Halloween Coffin Gift Box Treat Candy Holder SVG Laser Cut
I received svg files that I could not open in Lightburn, but after some time I received a replacement for one of the files, that could be opened. I opened the files as DXF and that worked. In my opinion the files are too big, so I reduced to 75% and used 2,25mm wood that I have got from China, and it looks better this way.
Great download. This was my first attempt at differnt colours. I used 3.2mm plywood so adjusted the finger holes to fit. I also reduced the length of the base fingers to 6mm from 9mm, that enabled me to have a plain base section so that the slots cannot be seen underneath. Next one will have LED fairy lights on the inside. I didn't include the witch on the stairs, I think it looks great without it. Good luck with yours. ATB.
doosje voor usb
Voor Huwelijk
Excellent file, worked perfectly first time! Thank you.
The cat with flowers needs to be glued to the head and not wiggle, or it looks strange. The Bone shape piece needs to be double to support the toy, so it does not break as easily as its too thin. If using glowforge need to change the line from engrave to score.
All Ok!
8 Laser cut Geometric Tealight Lantern SVG Candle Holder Wooden Lamp
Cute files. Only completed one so far.
These worked out beautifully. I altered the text to add scriptures from a wedding recently attended and created a box to gift and store them in. Great files.
Cute box. Larger than I expected. Had to contact customer service to correct the hinge ring size to fit properly and keep the doors from falling off. Once they finally fixed that issue it turned out great.
6 Halloween Coffin Gift Box Treat Candy Holder SVG Laser Cut
The animals are working out great. Only one small detail I’m working out about the wishbone piece. I doesn’t fit exactly so I am modifying it to work. Live and learn. Still great stuff and designs.
The files are adorable. The connecting pegs for the 3mm were extremely too long. Luckily I could adjust them to fit properly and make them work. Part of the owl feather engrave area were not connected to the owl. Luckily I could also correct that as well. All-in-all I was able to make them work and produced adorable magnets. I painted them with color pencils and paint markers.
10 Halloween Fridge Magnet Laser Cut SVG Multilayer Witch Pumpkin
Everything was fine.
Halloween Pumpkin House Lantern SVG Laser Cut Spooky Mansion Tealight Holder
Great design, looks great painted on just plain wood. My only gripe is no size for tissue box included to help which box to buy and no instructions yet from the included photos I did muddle bye... and the finished product is great.
Retro Radio Tissue Box Laser Cut SVG Woven Kitchen Table Decor
