Super easy to download and cut - for my hubby!
Neuankömmling
Neuankömmling
Osterhase Eierhalter 4 Bündel lasergeschnittene Datei SVG
$7.90
$21.00Save 62%
Grundpreis
/
Nicht verfügbar
SKU:
VPC-0429
⚡ Sofortiger digitaler Download
📂 Enthält die Formate SVG, DXF, AI, PDF, CDR
🛠 Kompatibel mit CO₂- und Diodenlasern (Glowforge, xTool, OmTech)
💼 Gewerbliche Nutzung erlaubt (physische Produkte)
Verfügbarkeit für Abholungen konnte nicht geladen werden
Size and Dimensions
Diese Datei ist speziell für Materialien mit Dicken von 3 mm, 0,125 Zoll, 4 mm, 0,166 Zoll, 5 mm, 6 mm und 0,25 Zoll optimiert und bietet große Flexibilität für verschiedene Projekte und Vorlieben. 📏
Getestete, keine generischen Dateien
Premium quality guaranteed
Saubere Vektoren – schnittbereit
Instant digital download
Optimiert für reale Materialstärken
Friendly support anytime
On the market since 2022
Trusted by thousands of makers
Add-on products for makers
$7.90
$21.00Save 62%
Grundpreis
/
Nicht verfügbar
Bewertungen von Creators
Customer Reviews
Overall rating: 4.9 / 5 from 2650 reviews.
Easy to cut and assemble quick download after purchase I added a small ghost on request of my granddaughter Thanks for a good easy project Thanks John
Very nice
Everything went really well. I love the outcome, it’s gorgeous! Merry Christmas to a sister ❤️
Die Teile haben recht gut gepaßt. Ich würde beim nächsten Mal die Reihenfolge beim Zusammenbau ändern. Zuerst alles im unteren Bereich einstecken, dann die Bodenplatte vom Haus einfädeln. Danach kann man in Ruhe die restlichen Teile zusammenbauen. Die Särge sind noch nicht gelasert. Roland
Nice patern. Files cut properly no adjustment needed
I ordered these for my laser engraving. Brand new to the hobby and I found these templates. I liked the patterns and can’t wait to start making earrings for Christmas gifts.
I upgraded the bar that attached the face to the body parts and magnet piece, as the original design would break if the magnet fell to the floor. I cut out the bar hole to fit a 3/8" dowel. Now it is much more secure.
Cut and went together great, removed the square hole in the middle to make way for a message.
It came out nice the candles were a little difficult to glue in place but as a hole very nice.
very accurate drawing.
what's to say? everything worked as expected. :)
Easy make
They turned out lovely. Thank you.
Easy build.
Everybody loves them, I’ve made them 3 times and will do it again. Easy to cut, and assemble, it just takes some time to paint them.
Great detail
Beautiful design. Went well with part of an antique table top.
Lots of good comments.
Great design and really fun to put together took me about a week just doing it in evenings. would highly recommend
Nice patern. Cut clean.had tu adjust the slots whar it fits
Great file!
Love them. And so do my animal lovers.
Files were easy to download, easy to cut/engrave and put together!! So much fun to make these countdown ornaments!! Love them all!
Love the finished product. But had trouble getting the pieces to fit on the base correctly. The flat piece of the small roof had to be resized to fit correctly on the 3mm file as well.
Yay
Fun design. Little tricky to hold the tops but manageable. Fun project.
I’m making four sets of these for make November craft show
Amazing files , just as they’re supposed to be cut and engraved beautifully
Easy file. Decided not to use the outer sign but it laser and scores well too.
This was my first one I did. I plan on doing a few more.
Excellent product easy-to-use.
Design is Great BUT Really Need to Do Something with Hinges...UNLESS the Hinges are Opposite Direction of Provided Photo is the Only Way Lid Opens like it's Suppose to...Would be 5 Stars If Hinges are Corrected....
6 Halloween Coffin Gift Box Treat Candy Holder SVG Laser Cut
I received svg files that I could not open in Lightburn, but after some time I received a replacement for one of the files, that could be opened. I opened the files as DXF and that worked. In my opinion the files are too big, so I reduced to 75% and used 2,25mm wood that I have got from China, and it looks better this way.
Great download. This was my first attempt at differnt colours. I used 3.2mm plywood so adjusted the finger holes to fit. I also reduced the length of the base fingers to 6mm from 9mm, that enabled me to have a plain base section so that the slots cannot be seen underneath. Next one will have LED fairy lights on the inside. I didn't include the witch on the stairs, I think it looks great without it. Good luck with yours. ATB.
doosje voor usb
Voor Huwelijk
Excellent file, worked perfectly first time! Thank you.
The cat with flowers needs to be glued to the head and not wiggle, or it looks strange. The Bone shape piece needs to be double to support the toy, so it does not break as easily as its too thin. If using glowforge need to change the line from engrave to score.
All Ok!
8 Laser cut Geometric Tealight Lantern SVG Candle Holder Wooden Lamp
FREQUENTLY ASKED QUESTIONS
How do I download the files after purchase?
After checkout, you’ll receive an instant download link to a ZIP archive with all files included. Check please Spam folder
Which laser machines and software are compatible?
These files work with most CO₂ and diode lasers, including Glowforge, xTool, OmTech, and software like LightBurn, RDWorks, Illustrator, and Inkscape.
What file formats are included?
You will receive SVG, DXF, AI, EPS, CDR and PDF files, compatible with most laser cutting software.
Are refunds available for digital products?
Due to the nature of digital downloads, refunds are not available once the files have been downloaded. But If you ordered it by mistake and don’t download we can refund
Do I need to edit or fix the files before cutting?
No. The files are ready to cut with clean vector paths.
What if I have a problem with the file?
If you need help, our customer support is available to assist you.
